Chevrolet Cruze History of development

Underpinned by the front-wheel drive GM Delta II platform, GM said the Cruze was "developed by a global design and engineering team". Most of the design work was conducted by GM Daewoo, with Opel responsible for most of the engineering. This development program spanned over 27 months at a cost of US$4 billion. A total of 221 prototypes were tested in Australia, Canada, China, South Korea, Sweden, the United Kingdom and the United States.
According to GM, the Cruze's body structure is 65 percent high-strength steel. MacPherson struts are utilized in the front suspension with a solid torsion beam axle for the rear, avoiding the costly multi-link independent rear suspension used by some more expensive rivals.


Chevrolet Cruze


Chevrolet Cruze


Chevrolet Cruze


Chevrolet Cruze


Chevrolet Cruze


Chevrolet Cruze


Chevrolet Cruze


Chevrolet Cruze


Chevrolet Cruze


Chevrolet Cruze


Chevrolet Cruze


Chevrolet Cruze


Chevrolet Cruze


Chevrolet Cruze


Chevrolet Cruze



Hydraulically-assisted rack and pinion steering gives for a 10.9-meter (36 ft) turning circle. Braking-wise, ventilated front, and solid rear disc brakes are employed, both using piston steel calipers. To counteract noise, vibration, and harshness, engineers have designed the Cruze with an isolated four-point engine mount and implemented sound damping material in areas including the front-of-dashboard panel, luggage compartment, decklid internals, doors, carpet and headlining. Further noise suppression through the use of a triple-layer sealing system in the doors has also been employed.




All Review videos and more of:• Infiniti• Mitsubishi• Aston Martin• Isuzu• Nissan• Audi• Jaguar • Pontiac• Bentley• Jeep• Porsche• BMW• Kia• Rolls Royce• Buick• Lamborghini• Saab• Cadillac• Land Rover• Saturn• Chevrolet• Lexus• Scion• Chrysler• Lincoln• Smart• Dodge• Lotus• Subaru• Ferrari• Maserati• Suzuki• Ford• Maybach• Tesla• GMC• Mazda• Toyota• Honda• Mercedes-Benz• Volkswagen• HUMMER• Mercury• Volvo• Hyundai• MINI.and MORE....

Chevrolet Cruze History of development

Underpinned by the front-wheel drive GM Delta II platform, GM said the Cruze was "developed by a global design and engineering team". Most of the design work was conducted by GM Daewoo, with Opel responsible for most of the engineering. This development program spanned over 27 months at a cost of US$4 billion. A total of 221 prototypes were tested in Australia, Canada, China, South Korea, Sweden, the United Kingdom and the United States.
According to GM, the Cruze's body structure is 65 percent high-strength steel. MacPherson struts are utilized in the front suspension with a solid torsion beam axle for the rear, avoiding the costly multi-link independent rear suspension used by some more expensive rivals.


Chevrolet Cruze


Chevrolet Cruze


Chevrolet Cruze


Chevrolet Cruze


Chevrolet Cruze


Chevrolet Cruze


Chevrolet Cruze


Chevrolet Cruze


Chevrolet Cruze


Chevrolet Cruze


Chevrolet Cruze


Chevrolet Cruze


Chevrolet Cruze


Chevrolet Cruze


Chevrolet Cruze



Hydraulically-assisted rack and pinion steering gives for a 10.9-meter (36 ft) turning circle. Braking-wise, ventilated front, and solid rear disc brakes are employed, both using piston steel calipers. To counteract noise, vibration, and harshness, engineers have designed the Cruze with an isolated four-point engine mount and implemented sound damping material in areas including the front-of-dashboard panel, luggage compartment, decklid internals, doors, carpet and headlining. Further noise suppression through the use of a triple-layer sealing system in the doors has also been employed.




All Review videos and more of:• Infiniti• Mitsubishi• Aston Martin• Isuzu• Nissan• Audi• Jaguar • Pontiac• Bentley• Jeep• Porsche• BMW• Kia• Rolls Royce• Buick• Lamborghini• Saab• Cadillac• Land Rover• Saturn• Chevrolet• Lexus• Scion• Chrysler• Lincoln• Smart• Dodge• Lotus• Subaru• Ferrari• Maserati• Suzuki• Ford• Maybach• Tesla• GMC• Mazda• Toyota• Honda• Mercedes-Benz• Volkswagen• HUMMER• Mercury• Volvo• Hyundai• MINI.and MORE....

GM Teases 2012 Buick Verano [aka the Opel Astra Sedan], Will be Built in Michigan

General Motors today released a new teaser photo of its upcoming 2012 Buick Verano compact sedan together with the news that the vehicle will be built alongside Chevrolet's new small car [we assume GM means the Aveo] at the Orion Assembly Center in Michigan. The Detroit automaker said it plans to invest $145 million to upgrade the factory for this reason.

"[The] Verano will bring premium styling, performance and content to Buick buyers wanting a smaller car than Regal," said GM North American President Mark Reuss. "The investment in Orion Assembly also extends GM's local small car footprint, again increasing the number of U.S.-made small vehicles available in showrooms."

Although the company did not get into any specific details on the new Verano, the cropped picture confirms our previous reports that it will be the same car sold in China as the 2011 Buick Excelle GT, which in turn is essentially the sedan version of the latest generation Opel Astra.

The small Buick is built on the same platform and shares basic engine architecture with the Chevrolet Cruze.

GM said the Orion Assembly is currently in the process of retooling the plant for the Verano and the small Chevy, with the improvements expected to be finished by summer 2011, which should allow for Buick to launch the car into the U.S. market before the end of the same year.

____________________________________________________________________

___________________2010 BUICK EXCELLE GT [CHINA]___________________

New Chevrolet Orlando MPV Shows up in Paris (With Live Pictures)

Finally, we've got live pics of the new Chevy Orlando. Essentially the General's answer to the European mid-size MPV question, the small, Cruze-based 7-seater had a bunch of promise back when it originally debuted as a concept.

Somewhere between there and this year's Paris Motor Show, all the old, Judge Whitey executives in the General's back pocket found a way to crush any chance of it being cool by turning the stocky little MPV into an ass-in-the-air high-ish-riding mini-minivan...unless there's an air suspension system I don't know about.

You can see that the interior keeps the decent styling inherited from its platform-mate and appears to actually be sourced from the original concept. Too bad the same can't be said for the rest.

When this little box goes on sale in early 2011, methinks the best things about the whole package are the trick dashboard cubby and its two available diesel torque-makers.

As for the rest, attractive European MPV it ain't. For the full info and specs, check out our previous post, and to see how the Orlando stacks up against the concept, head on over to our Concept to Reality comparo.

By Phil Alex

_____________________________GALLERY_______________________________