Tips How To Driving Safely And Efficiently

Tips for driving safely and efficiently :

1) Check Out Car Parts

Before using check the condition of the car around the body, make sure everything is in good condition and roadworthy.

Tires Checks

Check the air pressure and condition of tires (including spare tires) at least once a week before the car is used. Check the air pressure using Presure Tire Gauge, and make sure the pressure in accordance with the standards.

To check the thickness of the tire, use the Trade Wear Indicator, which formed as a triangular mark on the tire wall and a bulge in the tire treads.

If the development has been flat tire with the bulge, then replace your tires immediately.

Checking Machine

Make a check engine room at least once a week on the engine oil, brake oil, radiator water and battery water. Make sure the height of the oil or water below the maximum. Further checks are also rubber-rubber hoses and fan belt. Make sure all are still pliable and no cracks.

2) Checking In Car

When entering the car cabin important thing to check is the condition of rubber clutch pedal, brake and gas. Everything must be installed properly and not thin.
Then, check your car's hand brake as well, especially the lever and penguncinya. Everything must be in condition and functioning properly.

3) Sitting Position

There are 3 important things that will we get if we are correct sitting position, namely:

a) Communication
Easy to communicate with other riders and monitor the situation outside the car.

b) Leisure
Not easily tired and always alert even if driving long distances.

c) Control
Easy to feel the early symptoms when the car starts to lose balance. So that it can be anticipated.

To get the proper sitting position follow the procedures in the event:

Seat belt

Always use seat belts as a primary safety protective equipment. Make sure the sound of CLICK!, When installing it.

The use of proper seat belt, must pass through the shoulder and hip bones. Use the height of the seat belt to sit right.

Distance Chairs

Adjust the distance of your chair so you easily operate the gas pedal, brake and clutch.


Seat backrest

The position of chair should be comfortable, not too tall but not too gentle.

Distance Body Steering

Distance ideal body with a steering wheel that is about 25cm. How to measure it, put both your wrists at 12. Then set the back of the chair.

Retaining Position Head

Place the back of the head parallel to the height of the head.

Steering Altitude

Adjust the height of the steering to feel comfortable to drive.

Once seated comfortably, check the following:

Checking Instruments Dashboard
Check all indicators on the dashboard when the key in the ON position. For vehicles equipped with ABS and SRS airbag, make sure that when turning the car off the indicator.

Spion Glass settings
Set all the position of the rearview mirror so that makes it easy to monitor the situation outside the car.

Checking lights
Make sure all lights work properly.


4) Sports Steering

The position of the hands of the most appropriate basis while driving the left hand at 9 o'clock position and right hand at 3 o'clock position. Position your thumb should be vertical to the steering wheel and steering wheel does not go into the circle.

Avoid the habit of driving with one hand, palm of the hand and driving with your fingers into the wheel rim. Besides easy to lose control when driving a car, you are also in danger of injury or even death.

There are 2 techniques are appropriate if the steering is as follows:

1. Pull-Push
If the steering is a technique that most basic and safe to use in various situations, both driving at low speed or high.

2. Cross
This technique can be used at low speeds but requires a fairly large turning radius, such as when parking or turning.

5) Braking Technique

One of the features associated with the braking technique is Anti Lock Brake System (ABS), Electronic Brake Force Distribution (EBD) and Brake Assist (BA). ABS function for tires are not locked during braking.

How hard tread brake pedal as he directed cars to a safer place. Function EBD distributes braking power to each wheel based on vehicle load. This mechanism works with the ABS and is very useful when the brakes on road cornering.

In the meantime, BA is useful to increase braking power when brake suddenly. This mechanism works based on the speed of the brake pedal in an emergency. So with a little stamping but fast, the car can stop quickly.

6) Scanning
When he was driving a car, need to pay attention to all road users or road conditions around, such as motorcycles, cars, signs, pedestrians or other important objects that can affect alertness while driving.

7) Blind Spot
Blind Spot is an area that is not seen directly by the rearview mirror, right or left. With these limitations, need to familiarize themselves to do that is by turns Shoulder check to the left or the right moment in the direction you turn.

8) Safe Following Distance
When driving, keep a safe distance ideal car with the car in front which is about 3 seconds. How:
Find a benchmark that is big enough and did not move along the road.
Then when another car in front across the benchmark, the count with the number '1000 and 1, 1000 and 2, 1000 and 3 '.

Make sure the car through the same benchmark at the end of the count. If it is correct, then you meet a safe distance is ideal.


9) Safe Stopping Distance
When stopped the car, make sure the car is sufficient distance so that it can see both rear tires the car in front. This is so easy when there conditions that force you must exit the vehicle queue.

10) Parking
For ease when parking, need to understand and use existing standards on cars.
Fuel Efficiency Tips When Driving:

• Make sure the engine always excellent condition.
 • Keep the engine speed remains low.
• Avoid excessive acceleration and braking.
• Use with engine braking.
• tire air pressure is always normal.
• Use a pump that is credible and accurate.
Turn off the AC when not needed.

Benefits tachometer To Conserve Fuel

Tachometer or bookmark RPM rotation per minutes, certainly not just decorate the dashboard. But the benefit to drivers because it can be a guide to operating a car with frugal.

This is because through a tachometer, the driver will know when the right time to change the gear position. Also, run the vehicle on lap static accordance with the instructions of each manufacturer, can be more menghamat fuel consumption.

Proper replacement teeth done when the engine reaches maximum torque (maximum moment).
Note the technical data of cars and see information about Maximum torque (maximum torque). Manual book contains information about this data. Usually, written with units feet / lbs, feet-pounds, or Newton meters (Nm). Each machine has a different maximum torque. Typically, the rate of torque (moment) is always associated with a number of engine speed (RPM).

For example, technical data on the manual written book Maximum torque: 200 Nm/3.750 rpm. This means that the highest moment of 200 Nm occurs at the time of rotating machines as much as 3750 per minute.
In this example, means you should make the shift gear when the rpm shows the range of 3750 numbers.
Figures RPM on tachometer is also important to note not only when the change gear to a higher position. To streamline fuel consumption, while speeding down the road Keep the engine speed in the range of the maximum torque. Because, that's when fuel supply is in accordance with the output of machinery and manpower needed to drive the car.

Extend Vehicle Age

1. Avoid warming the engine are too long, if the average spin machine has run the vehicle.

2. Round cultivated machine do not be too low and not too high.

3. Avoid running the vehicle at high speed, try to run the vehicle with constant speed and do not mengkocok-whipped on the accelerator when not needed.

4. When driving do not put a foot on the clutch pedal

5. Keep your tire pressure according to vehicle / right.

6. For vehicles using Exhaust Brake, position the main switch to ON if you're driving.

7. Follow the maintenance of the existing maintenance schedule on pedomn book owners and book service.


Important Things In Running New Vehicles

Having a new car would you want to be driving. But do not get too excited because you forgot some important things you should consider in running a new vehicle. If you run a new vehicle that was carefully and follow the instructions given by the manufacturer then your vehicle will be in the best condition, of course, followed by regular maintenance routine. Here are the things that need to be considered in running the new vehicle:

1. For the first 1,000 km of vehicle must be run in ways that special or so-called running-in.

2. Read the manual carefully run a vehicle provided by the manufacturer and execute when running the vehicle.

3. Before running the vehicle, Heat engine first, do not run a vehicle with a sudden, do not hold acceleration and do not brake suddenly.

4. Do not work on the engine rev too high. We recommend that you labored to spin machine is always lower than 60% of maximum engine speed.

5. After the vehicle undergoing the first 10,000 km, replace the engine lubricating oil, and filter

6. After undergoing vehicle 10,000 km, there is the possibility of bolt-bolt became loose. So bring your vehicle to the garage for inspection and dikokohkan bolts and screws. Also check the free slit valve.

7. Know your vehicle well before you start your vehicle at high speed because each vehicle has unique characteristics, especially in terms of security and safety in travel.

Tips How To Driving Safely And Efficiently

Tips for driving safely and efficiently :

1) Check Out Car Parts

Before using check the condition of the car around the body, make sure everything is in good condition and roadworthy.

Tires Checks

Check the air pressure and condition of tires (including spare tires) at least once a week before the car is used. Check the air pressure using Presure Tire Gauge, and make sure the pressure in accordance with the standards.

To check the thickness of the tire, use the Trade Wear Indicator, which formed as a triangular mark on the tire wall and a bulge in the tire treads.

If the development has been flat tire with the bulge, then replace your tires immediately.

Checking Machine

Make a check engine room at least once a week on the engine oil, brake oil, radiator water and battery water. Make sure the height of the oil or water below the maximum. Further checks are also rubber-rubber hoses and fan belt. Make sure all are still pliable and no cracks.

2) Checking In Car

When entering the car cabin important thing to check is the condition of rubber clutch pedal, brake and gas. Everything must be installed properly and not thin.
Then, check your car's hand brake as well, especially the lever and penguncinya. Everything must be in condition and functioning properly.

3) Sitting Position

There are 3 important things that will we get if we are correct sitting position, namely:

a) Communication
Easy to communicate with other riders and monitor the situation outside the car.

b) Leisure
Not easily tired and always alert even if driving long distances.

c) Control
Easy to feel the early symptoms when the car starts to lose balance. So that it can be anticipated.

To get the proper sitting position follow the procedures in the event:

Seat belt

Always use seat belts as a primary safety protective equipment. Make sure the sound of CLICK!, When installing it.

The use of proper seat belt, must pass through the shoulder and hip bones. Use the height of the seat belt to sit right.

Distance Chairs

Adjust the distance of your chair so you easily operate the gas pedal, brake and clutch.


Seat backrest

The position of chair should be comfortable, not too tall but not too gentle.

Distance Body Steering

Distance ideal body with a steering wheel that is about 25cm. How to measure it, put both your wrists at 12. Then set the back of the chair.

Retaining Position Head

Place the back of the head parallel to the height of the head.

Steering Altitude

Adjust the height of the steering to feel comfortable to drive.

Once seated comfortably, check the following:

Checking Instruments Dashboard
Check all indicators on the dashboard when the key in the ON position. For vehicles equipped with ABS and SRS airbag, make sure that when turning the car off the indicator.

Spion Glass settings
Set all the position of the rearview mirror so that makes it easy to monitor the situation outside the car.

Checking lights
Make sure all lights work properly.


4) Sports Steering

The position of the hands of the most appropriate basis while driving the left hand at 9 o'clock position and right hand at 3 o'clock position. Position your thumb should be vertical to the steering wheel and steering wheel does not go into the circle.

Avoid the habit of driving with one hand, palm of the hand and driving with your fingers into the wheel rim. Besides easy to lose control when driving a car, you are also in danger of injury or even death.

There are 2 techniques are appropriate if the steering is as follows:

1. Pull-Push
If the steering is a technique that most basic and safe to use in various situations, both driving at low speed or high.

2. Cross
This technique can be used at low speeds but requires a fairly large turning radius, such as when parking or turning.

5) Braking Technique

One of the features associated with the braking technique is Anti Lock Brake System (ABS), Electronic Brake Force Distribution (EBD) and Brake Assist (BA). ABS function for tires are not locked during braking.

How hard tread brake pedal as he directed cars to a safer place. Function EBD distributes braking power to each wheel based on vehicle load. This mechanism works with the ABS and is very useful when the brakes on road cornering.

In the meantime, BA is useful to increase braking power when brake suddenly. This mechanism works based on the speed of the brake pedal in an emergency. So with a little stamping but fast, the car can stop quickly.

6) Scanning
When he was driving a car, need to pay attention to all road users or road conditions around, such as motorcycles, cars, signs, pedestrians or other important objects that can affect alertness while driving.

7) Blind Spot
Blind Spot is an area that is not seen directly by the rearview mirror, right or left. With these limitations, need to familiarize themselves to do that is by turns Shoulder check to the left or the right moment in the direction you turn.

8) Safe Following Distance
When driving, keep a safe distance ideal car with the car in front which is about 3 seconds. How:
Find a benchmark that is big enough and did not move along the road.
Then when another car in front across the benchmark, the count with the number '1000 and 1, 1000 and 2, 1000 and 3 '.

Make sure the car through the same benchmark at the end of the count. If it is correct, then you meet a safe distance is ideal.


9) Safe Stopping Distance
When stopped the car, make sure the car is sufficient distance so that it can see both rear tires the car in front. This is so easy when there conditions that force you must exit the vehicle queue.

10) Parking
For ease when parking, need to understand and use existing standards on cars.
Fuel Efficiency Tips When Driving:

• Make sure the engine always excellent condition.
 • Keep the engine speed remains low.
• Avoid excessive acceleration and braking.
• Use with engine braking.
• tire air pressure is always normal.
• Use a pump that is credible and accurate.
Turn off the AC when not needed.

Benefits tachometer To Conserve Fuel

Tachometer or bookmark RPM rotation per minutes, certainly not just decorate the dashboard. But the benefit to drivers because it can be a guide to operating a car with frugal.

This is because through a tachometer, the driver will know when the right time to change the gear position. Also, run the vehicle on lap static accordance with the instructions of each manufacturer, can be more menghamat fuel consumption.

Proper replacement teeth done when the engine reaches maximum torque (maximum moment).
Note the technical data of cars and see information about Maximum torque (maximum torque). Manual book contains information about this data. Usually, written with units feet / lbs, feet-pounds, or Newton meters (Nm). Each machine has a different maximum torque. Typically, the rate of torque (moment) is always associated with a number of engine speed (RPM).

For example, technical data on the manual written book Maximum torque: 200 Nm/3.750 rpm. This means that the highest moment of 200 Nm occurs at the time of rotating machines as much as 3750 per minute.
In this example, means you should make the shift gear when the rpm shows the range of 3750 numbers.
Figures RPM on tachometer is also important to note not only when the change gear to a higher position. To streamline fuel consumption, while speeding down the road Keep the engine speed in the range of the maximum torque. Because, that's when fuel supply is in accordance with the output of machinery and manpower needed to drive the car.

Extend Vehicle Age

1. Avoid warming the engine are too long, if the average spin machine has run the vehicle.

2. Round cultivated machine do not be too low and not too high.

3. Avoid running the vehicle at high speed, try to run the vehicle with constant speed and do not mengkocok-whipped on the accelerator when not needed.

4. When driving do not put a foot on the clutch pedal

5. Keep your tire pressure according to vehicle / right.

6. For vehicles using Exhaust Brake, position the main switch to ON if you're driving.

7. Follow the maintenance of the existing maintenance schedule on pedomn book owners and book service.


Important Things In Running New Vehicles

Having a new car would you want to be driving. But do not get too excited because you forgot some important things you should consider in running a new vehicle. If you run a new vehicle that was carefully and follow the instructions given by the manufacturer then your vehicle will be in the best condition, of course, followed by regular maintenance routine. Here are the things that need to be considered in running the new vehicle:

1. For the first 1,000 km of vehicle must be run in ways that special or so-called running-in.

2. Read the manual carefully run a vehicle provided by the manufacturer and execute when running the vehicle.

3. Before running the vehicle, Heat engine first, do not run a vehicle with a sudden, do not hold acceleration and do not brake suddenly.

4. Do not work on the engine rev too high. We recommend that you labored to spin machine is always lower than 60% of maximum engine speed.

5. After the vehicle undergoing the first 10,000 km, replace the engine lubricating oil, and filter

6. After undergoing vehicle 10,000 km, there is the possibility of bolt-bolt became loose. So bring your vehicle to the garage for inspection and dikokohkan bolts and screws. Also check the free slit valve.

7. Know your vehicle well before you start your vehicle at high speed because each vehicle has unique characteristics, especially in terms of security and safety in travel.

Washing car engine management tips

Washing your car's engine management tips you also cleaned on a regular basis to verify that the engine compartment looks like a new brand, please keep your vehicle's exterior. Check for fluid leaks or oil to prevent rust belt to wear can be detected to perform this task, including the many reasons. Start your engine oil and grunge, and run for several minutes and then let off the engine compartment, gently watering. You just do not burn if you can get your hands on the machine, it is clean, and it is warm enough. Optimum temperature and the engine are not sexy, warm and clean.

This is your engine and air filters, distributors, coils, and oil dipstick / Brakes, including air intake in. You do not want to get some water to cover; we recommend the adoption of the motor during cooling. You Baggies and rubber bands to cover the holes can be used. You can also cap oil filter, power steering cap, glass cap washer fluid, battery filler caps and check the tightness of all the other hats would.

Now all you have, then spray the engine compartment seal, engine warm and machine with high-quality non-petroleum based degreaser. You will not be covered in your face degreaser that, starting from the bottom up to work.


Degreaser for about 3-5 minutes, and then remove a large area to start a dirty 100% cotton towel or use a soft brush is acceptable. Then again, spray again, what part you need additional cleaning brush. All machines are thoroughly cleaned and the engine compartment after the water washed it. I will work with your high-pressure sprayer and spray without the uses of soft delicate point you should not worry about getting in the water.

Remove rubber bands and plastic bags and to clean the engine compartment. Then, with some standing water, aluminum, soft towel to dry. Use paper towels to dry the battery. You can now start the engine and warm up. This is the rest of the machine and dry to evaporate the water has been collected.

After drying everything, you need to wax the engine compartment to the green fields, but the engine to cool completely. Finish undercoated aluminum case so you can restore dull or lightweight metal corrosion with some white polish. Currently, they clean the battery terminals should be. They you unplug the cable, wire brush, and clean both terminals and battery posts if you do not.

If so, you need them with silicone lubricant, a thin layer of rain for all to see the hinges, throttle cables and the impact should. So, check all fluid levels and to remove any stray Baggies have completed cleaning your machine.

Tips : How To modification Your Automotive

Modifying your automotive can provide you with the chance to create your vehicle distinctive from others. However, there are numerous styles of modifications you will be able to do for your vehicle these days. There are mainly two styles of automotive modification, modifications, interior and exterior modifications. Interior modifications involve the institution of prime quality leather seat covers, music system upgrades, LCD monitors etc. and exterior modifications embody replacing your traditional with alloy rims, projector lamp fitting, etc. The person skirt creates common modifications like these days.

Modifying a automotive is extremely low cost these days compared with the past. Within the past, adjusting the vehicle is taken into account as an announcement of luxury. However, these days most of the people value more highly to do some modifications on their cars in accordance with their desires and fancies. Some corporations specifically launched to produce spare components for automotive modifications of the folks.

There is even a racing automotive kit provided for today. This is often mainly as a result of most of the people will not be ready to purchase a racing automotive. Therefore, racing kit made for people that wish to feel a lot of power in their vehicles. Fitting skirt for your automotive can provides a sporty search for them. This can enable you to urge the planning of your favorite sports automotive with simply pay less cash. Therefore, you will be able to conjointly create modifications to the automotive to relinquish your automotive the planning you wish. Did you modify your automotive terribly fast? You higher quickly modify your automotive with all custom components, tools and accessories to create everybody marvel on your automotive. This is often the simplest factor we are able to do to switch his automotive.

Finding The Best Motor Homes

There are some things you need to know before buying motor homes. Motor homes or motorized recreational vehicles (RVs) come in different classes. Two of those classes are usually confused with each other, those being class A and class C motor homes. It's essential to look at the physical appearance of the motor home in order to determine whether it is class A or class C. Class A motor homes resemble a bus design with a flat or vertical front end and large windows while hand class C motor homes have a truck cab with an over-cab bed, in some ways resembling a camper.

Considered to be top of the line, Class A motor homes measure at about 24 feet or 7.3 meters and can be as long as 40 feet or 12 meters. Their weight can range between 15,000 to 30,000 pounds or 6,804 to 13, 608 kg; the undercarriage may be custom or a 3 to 10 ton truck chassis. Class A motor homes come with each of the luxury amenities you can fathom like a kitchen, a bathroom with shower and a tub, and sometimes a separate bedroom at the back depending o the floor plan of the truck. They also have heating and air conditioning, hot and cold running water, 100-125 volt electrical system, a dinette or living room area complete with couch and recliners, closets and an entertainment center. This is just the tip of the iceberg. In fact, some of these motor homes can be more elaborate than homes themselves.

Class A motor homes are usually utilized by famous bands especially when they are in tour. There are also some rich families that own Class A motor homes for vacation and travel. A Class A motor home is perfect for those who can afford its high cost. Most Class A motor homes have all leather interior, a wet bar, big screen TVs, an advanced sound system and other high technology that may not be available to lower income families.

Depending on the model and the floor plan a class A RV can accommodate up to 8 people. But all of this luxury comes at a price. New, lower-end models are sold at up to $50,000 US dollars while larger and much nicer class A RVs can even cost more than any house in many states coming in at about $300,000+. Class A RVs are really very expensive; in fact even used class A RV can still be sold for $30,000-$40,000. If you prefer luxury lines, you may start saving about $325,000 up to over $1 million if you prefer the crème de la crème of all RVs.

Last but not least are Class C motor homes. Class C motor homes can also come in very luxurious models or more economical ones depending on your budget. They are much lighter in weight, ranging only from 10,000 to 15,000 pounds and generally run from just under 20 to 44 feet in length. They are constructed on cutaway chassis depending on the model. The cab is usually similar to that of the truck with a bunk above plus a rear bedroom. Just like the class A, Class C motor homes have all the amenities of home including kitchen, bathroom, dinette, heating and air conditioning system, and an entertainment center for additional cost.

Dinettes are not always present in class C motor homes and if ever there is one included, it usually converts into a double bed. If a dinette is not present, two captain chairs are available instead. Sometimes, the motor homes contain a couch and chairs instead of captain chairs. The couch may also be turned into a sleeper couch.

Because of the overcab bed, a Class C motor home can sleep more than a comparable Class A motor home, accommodating up to 10 people are accommodated. The cost of class C motor homes ranges from $50,000 to $170,000.

The common features of Class A and Class C motor homes are their slide-out wherein with a simple touch of a button the wall of the living room expands outwards to extend the living space by several inches.

Another type of motor home is the Class B which is usually referred to as van conversion. Class B motor homes look like pop-top camper vans and are self contained but cramped compared to their big motor home counterparts. The advantage of purchasing a Class B motor home is in terms of handling and size that is if you don't want spacious motor home. They are usually promoted as a place to sleep more than what is deemed comfortable by most people. The class B motor home can also be used as a second car. Its price ranges from $38,000 to $75,000.

Motor homes are great for camping, road trips, or just simply living in style. If you are interested in purchasing a motor home, it is definitely wise to take time to do some comparison shopping and research as these motor homes can prove to be very expensive.

Why Hybrid Car Drivers Need Thick Skin

Buying a hybrid car is more than a calculated decision to save fuel. It is a statement about "saving the planet".

Even if the chances are pretty slim that hybrid technology will actually make much difference, it gives hybrid owners the right to feel superior. After all, they care about the planet. And the rest of the world obviously doesn't.

But if you're one of those hybrid owners you'd better be ready to lose some friends. Here's why...

1. You're Driving Way Too Slow

In theory at least, hybrid owners are the antithesis of those guys who just ache to get in that passing lane and leave the rest of us behind. You know the type...you're minding your own business coming out onto the expressway and the otherwise ordinary guy in the vehicle behind you swings out and passes even before you've hit the highway.

Hybrid owners seem to do just the opposite. You've known for years that driving slow saves fuel. So you're likely to be driving under the speed limit rather than over like the rest of the world.

The fact that you're driving a hybrid just makes it worse, since you know that all the potential savings are squandered if you try to go fast.

Especially when you're accelerating. That guy in the high powered vehicle who pulls out and passes... the thought of saving gas has never crossed his mind. But hydrid owners know better. For you it's a moral duty to save fuel. The fate of the planet depends on it. So there's no way you're going to try any of that fast acceleration stuff.

2. What's with the Pulse and Glide Stuff

You've been told that "pulse and glide" can make a serious difference to your gas milage. That's where you accelerate (conservatively) to the speed limit, and then let the car "glide" to 10 or more miles per hour below the speed limit. Repeat this procedure. Repeat this procedure. Repeat this procedure...

I once had a friend who drove like this. I thought he was dozing off between pulses, but now I know differently. He was actually doing the environmentally responsible thing.

My friend's driving habits aside, this practice is not going to endear you to all the rest of the drivers who can't figure out why you keep slowing down. It's probably smart to speed up just a little when you find yourself in anything other than the "slow" lane.

All bets are off when they let you use the carpool lane.

3. You Just Won't Inch Forward Will You!

Everybody else in the world knows that you must "inch" forward during stop and go traffic. How else are you going to keep up with the driver in front. Besides, if you leave more than about a 15' gap between you and the guy ahead somebody's going to jump into the gap and slow you down even more.

Hybrid drivers have been told this "inching forward" stuff is pointless and wastes fuel. And the way they build hybrids these days they've got a point. When you take your foot off the brake pedal the auto-stop turns off and the gasoline engine restarts -- like one of those gasoline engine golf carts. And there goes most of your gas savings. All those stops and starts just eat up the gas.

But don't expect your mono-drive cousins to understand. They've only got one thing in mind: to get wherever they're going just as fast as possible. And everybody knows that racing up behind the guy in front is the only way to make that happen.

4. Do you really think you should be drafting me like that?

The responsible hybrid owner will make use of every advantage to save gas. And drafting larger vehicles is one technique that the more aggressive will try. That's where you pull right up behind a semi, a van, or an SUV and try to stay in the pocket of air they are pulling along behind them.

I remember doing this with an old '65 Beetle a few years back. We were travelling along the New York Thruway drafting semis. We were making great time and saving lots of gas... until we blew a rod.

Of course, sticking on someone's bumper will not endear you to too many of your fellow drivers. And as I discovered, it's a bit dangerous too. You'll find yourself going quite a bit faster than you otherwise would go. And whipping along in that back-draft does not do a lot for your stability.

Just try to remember, when you're out there on the highway trying to save the planet, the rest of the world could care less about your morally superiour driving habits. All they want to do is get where they're going as fast as they can.

Take Control Of Rising Gas Prices

Rising gas prices are prompting many drivers to fill up on gas-saving tips.

Fortunately, drivers can add miles to every gallon they pump by following a few easy and inexpensive maintenance tips from the Car Care Council:

• Vehicle gas caps-About 17 percent of the vehicles on the road have gas caps that are either damaged, loose or are missing altogether, causing 147 million gallons of gas to vaporize every year.

• Underinflated tires-When tires aren't inflated properly, it's like driving with the parking brake on and can cost a mile or two per gallon.

• Worn spark plugs-A vehicle can have either four, six or eight spark plugs, which fire as many as 3 million times every 1,000 miles, resulting in a lot of heat, electrical and chemical erosion. A dirty spark plug causes misfiring, which wastes fuel.

• Dirty air filters-An air filter that is clogged with dirt, dust and bugs chokes off the air, wastes gas and causes the engine to lose power. Replacing a clogged air filter can improve gas mileage by as much as 10 percent, saving about 15 cents a gallon.

• Don't be an aggressive driver −-Aggressive driving can lower gas mileage by as much as 33 percent on the highway and 5 percent on city streets, which results in seven to 49 cents per gallon.

• Avoid excessive idling-Sitting idle gets zero miles per gallon. Let the vehicle warm up for one to two minutes only.

• Observe the speed limit-Each mpg driven over 60 will result in an additional 10 cents per gallon. To maintain a constant speed on the highway, cruise control is recommended.

• Combining errands into one trip saves gas and time. Several short trips taken from a cold start can use twice as much fuel as a longer multipurpose trip covering the same distance.

• Avoid carrying unneeded heavy items in the truck. An extra 100 pounds can cut fuel efficiency by a percent or two.

As part of the "Be Car Care Aware" education campaign, the Car Care Council offers a free service interval schedule to help take the guesswork out of what vehicle systems need to be routinely inspected and when service or repair should be performed.

Top 10 Tips For Buying A Car

1. Money: Make sure you know what is your budget. Never exceed the amount you can afford. For instance if your income is 50,000$ USD, you shouldn't spend more than 25,000$ on the car because the car will may become a finical problem to you.

2. Personal need: Ask yourself what is the purpose of the car. Decide whether you want a 4 door sedan or a 6 people van. Look into what class and what kind car you want. If the purpose of the car is just purposely transportation, then don't look into luxurious cars such as Benz or BMW. Or whether the car is for family purpose or personal love of car then you can decide whether you want a SUV or Sports Car.

3. Difference Brand: Once you decide what type of car you want. Look at different brands that has similar cars. For instance, if you are looking into the Lexus IS, also look into the Nissan G35, BMW 3 series, Acura TL, Cadillac CTS. You get the point. The reason why is because the price range from the same class can range from 30,000 to 45,000 which is a lot of money. Therefore, you should go test drive and find out exactly which car you want.

4. Buying it New or Used. After you decide what car you want. Start researching online on how much does the new car and the used car cost. Make you sure researching on many dealerships as well. You can save up to 1,000$ USD. Personally, I would like to buy a new car over a used car, but if there's a good deal on used car, then you should reconsider and decide yourself.

5. Finance. Try to reduce the finance rate as low as possible to benefit you more. Try to look for the best plan for you and communicate with the dealer.

6. Communication with the Seller. Now this is the tricky part. Dealers usually jacked up the price of the individual car because they can make more money if they make sales. Therefore, to prevent spending extra money, you should do your homework by reaching how much your car is really worth and make offers to the dealers instead of them making offer to you.

7. Mileage. There no doubt that the price of gas will continue to go up. Therefore, it might be a good idea to consider how much you are willing to spend on gas. You want to find a good car with good mileage.

8. Insurance Cost. Different car also have different insurance rate even when they are in the same class. The insurance cost should definitely be a factor to consider when you are comparing with other cars.

9. Maintenance Cost. Maintenance Cost for cars also varies for different car. For instance Benz will charge over 100$ just for an oil change while Toyota may charge 25$.

10. Warranty. This should be the last thing you look at when you buy a car. Look at what the warranty covers and compare with it other car companies

Tips For Getting Motorcycle Helmets For The Kids

Greg is an active 2 wheeled biker. The first time this person rode on one, this individual knew this was the best way to drive through the open road in the hopes of adventure.



When this individual got married, a part of this biker wanted to settle down and keep the memory of the past behind. This is the reason that this father of two would sometimes bring the kids out around the neighborhood to reminisce this memory.


State laws require the biker to wear a helmet when driving on the street. The passengers are also required to do the same even if the one in the back is a kid.

Greg knew that helmets for kids are not available where the motorcycle was purchased. This is because the place only sold models for adults so none of these will fit. The best place to go to then is the sports shop since people can get helmets for skateboarding and bicycling.

Here are tips to get the right motorcycle helmet for the kid.

· Before putting it on the child, it will be a good idea to check for defects such as cracks, loose padding, frayed straps or exposed metal that could be unsafe for the child.

· If its safe to put on, the parent must make sure that his will snugly go around the child's head. If this is too heavy, this should be changed for something else. This should be worn for 30 minutes to make sure it is comfortable for those long trips.

· To prevent this from falling off, it is advisable to get the one that has strong straps with two rings so it can be securely fastened.

· The helmet for the kid should be just like the driver's that come in bright colors such as red, yellow, white or orange. This should be made of reflective material that may have stickers in the back or in the sides making it easy for motorists in the back to notice there is a motorcycle in front many yards away.

· The best helmets to buy should be those that have a sticker inside certifying that this has gone numerous tests.

After about an hour in the shop, Greg was able to find two helmets for the kids. The family then went home so everyone can get on the bike and make that first road trip a few blocks away from where these people lived.

The Top of The Line Mazda

One particular company which has managed to maintain its personal against several contenders ranging from luxury marques and sports vehicles to household vehicles is Mazda. Mazda Motors, headquartered in Hiroshima, Japan, has captured a current market of individual car or truck lovers who gravitate in the direction of high-performance, fun and inexpensive vehicles.




The business was founded in 1920. It was once named Toyo Kogyo. Mazda's three-wheel truck production started in 1931. Mazda can be not match to bigger auto business players like the top 3 producers, but it has succeeded in setting itself apart by adding sporty flavor to its cars. Hence, Mazda has gained a following not just while using leisure-oriented industry but also with executives. It has gained acceptance on the elite set that uses various car or truck users.

Mazda introduced its R360 Coupe, a two-passenger auto, in 1960. A year later, it presented the Mazda B-series 1500 compact pickup. The year 1962 marked numerous milestones for the vehicle maker. It commenced local assembly in South Korea, and also introduced the Mazda Carol 600, a four-door passenger vehicle. The Mazda Familia appeared in October 1963.

Mazda knowledgeable a significant sales slump throughout the 1960s. Mazda applied to be part of the Ford group. It partnered with Ford Motor Company within the 1970s in order to survive the American oil crisis.

Other automotive highlights in Mazda's background include the production of the B360/B600 Keicar pickup truck, the Cosmo Sport 110S, the Chantez keicar, the Luce/RX-4 luxurious automobile and also a minivan called Bongo. The launching in the market of the Cosmo in 1976 made a stir. A lot of car aficionados marveled at the luxury design and competitive price. In the course of the 1980s Mazda seasoned a rebirth, with requirement for its 323 and 626 soared inside the U.S. current market. In 1990, the Mazda MX-5 Miata also helped with brand strength and company vigor.

To date, Mazda continues to increase its marketplace reveal. One of its innovations, the Mazda5, is probably one of the most agile minivans in the market.


Do you like super fast sports cars? You will find thesupercars.org very useful for information about exotic sport cars. Make sure to also visit used maserati.

Fuel Efficiency In The 2010 Ford Ranger

This year Ford has built their 2010 pickup trucks with flexibility, versatility and value and that includes excellent fuel economy, especially with the Ford Ranger. The fuel efficiency in the 2010 Ford Ranger is not only better than ever, but it also gives you options. As a Small light weight in the pick updepartment, customers can choose between the ''?compact pick-up truck''? sized efficient I-4 engine for maximum fuel efficiency or the larger and more powerful V-6 engine for maximum payload capacity.

The Ranger's EPA-estimated fuel economy rating for the rear wheel drive 5-speed manual transmission is 22 mpg in the city and 27 mpg on the highway for the 2.3 liter, 143 horsepower I-4 engine available for the XL and XLT models. The automatic transmission performance delivers 19 mpg inthe city and 24 mpg on the highway. Now that is something that the consumer can get excited about.

The 4.0 liter, 207 horsepower V6 engine with rear wheel drive and 5-speed manual transmission available on the XLT and standard on the Sport models has an EPA-estimated fuel economy rating of 16 mpg inthe city and 21 mpg on the highway while boasting a large towing capacity of 5,760 pounds. The estimated ratings for this engine with an automatic transmission and four wheel drive are 14 mpg inthe city and 18 mpg on the highway.

All in all, the 2010 Ford Ranger power performance demonstrates competitive horsepower numbers that could be higher when compared to other manufacturers' models, but offers an excellent fuel economy in comparison to competitors, especially for the models utilizing the 2.3 liter I-4 engine.